Press Fitting


With the modern pressing technology of Pimaflex multipipe systems a permanently tight connection is performed within seconds. Basic to that are the press fittings with their unique characteristics

 

Push Fitting (Plastic)


Pimaflex Push Fitting has been invented for easy and fast installation. Made from high quality Poly-propylene from Germany the push fitting provides many benefits for hot and cold water systems in regards of strength and temperature.

 

Push Fitting (Metal)


The Push Fitting with its easy installationand its thoroughly engineered construction, is the perfect complement to the system

 

AirCon Fitting


A special designed and locally manufactured fitting ensures the perfect connection with the air condition systems of well known brands.

 

 

Push Fitting
(plastic)

 

Pimaflex Multipipe Plastic Push Fitting has been invented for easy and fast installation.Made from high quality Poly-propylene from Germany the push fitting provides many benefits for hot and cold water systems in regards of strength and temperature.

 

 

 

 

 


Benefits

  • A comprehensive range of fittings provide a complete system for potable water.
  • Fast and simple installation, requires no specialist site equipment or skilled labor.
  • Slim enough to be buried in walls and able to withstand very high pressure.
  • Long durability due to the high resistance to aggressive elements, which gives the system a long service
  • Incomparable smooth and porosity free internal surface of both pipes and fittings,which results in very low pressure loss and absence of incrustation.
  • Non toxic and physiologically harmless material.
  • Resistance to bacteriological attack, thus enabling safe and potable water transfers.
  • High preservation and energy saving abilities.
  • High acoustic insulation against fluid noise.
  • Light weight compared to the metallic piping system.
  • Cost effective pipeline network.
  • The fitting is designed to allow the pipe to reinstall when needed.
  • Outlet thread is patented bronze-plastic combination to protect water leakage.

 

How it works

 
  • Push the Pimaflex Multipipe into the fitting body until the pipe touches the edge inside of the fitting. Check the pipe mark to ensure it is done properly.
  • Stainless steel grab ring grasps the pipe instantly. When the water pressure increases, grab ring slides back and its teeth are fixed on the surface of the pipe more firmly.
  • O-ring seal is made from EPDM and is coated by food-grade silicone grease to lubricate and make the rubber life longer.
  • Dust cover protects the fitting against the dirt or wet cement during installation.
  • In case of dismantling, the release key is inserted in the gap between the edges of the grab ring. After the teeth are extracted, the pipe is pulled out easily.

 

How to install the Push Fitting

Cut the pipe square with the pipe cutter

 

Push the sleeve into the pipe

Mark the pipe by measure with
the pipe depth line on the fitting

Put the pipe into the fitting carefully

Push the pipe into the fitting until it touches
the edge inside of the fitting

How to uninstall the Push Fitting

Take off the dust cover

 

Insert the release key by pointing the fin to the gap between the grab ring

Push the release key into the fitting

Pull out the pipe from the fitting